SMG8000 Three-phase Power Meter

SMG8000 Three-phase Power Meter Calibrator it is specifically designed for on-site inspecting the running error and fault of power meter in electric system. The instrument is due to sampling with high-precision internal transformer and clamp-type transformers so that allows the operator to quickly safely and reliably measure the error and wiring fault of power meter which provides effective basis for operator to

Functions and features:

3.1 Adopt TI 32-bit high-speed 150MHz DSP and the AD company's high-performance 12-channel and 16-bit AD the use of floating-point operation to ensure the accuracy of the calculation.
3.2 The instrument uses a large 10.4-inch industrial grade TFT color screen the interface display is clear beautiful and informative every parameter of function will be displayed in the screen is a screen display of all parameters which make the user clear when in operation.
3.3 Can measure active energy error reactive power error voltage current active power reactive power phase frequency power factor display the vector and check out results.
3.4 Can simultaneous measure active reactive and the error between the two energy meters: with high efficiency which is two time of the traditional calibrated method.
3.5 Wiring simulation function: When the instrument not access voltage and current signals can be simulated in a variety of wiring the office site and then get a appropriate wiring result. Can be as a training tool to improve the staff skills to check line.
3.6 Unbalance measurement: can measure the voltage quality for three-phase three-wire three-phase four-wire current unbalance can detect hidden faults stealing electricity leakage and other anomalies fast and simple.
3.7 5A clamp error self-checking: the instrument can produce 5A 0.5A current signal to the 5A current clamp to measure the clamp meter error. Can calibrate the 5A clamp after a long-time operation.
3.8 PT CT secondary load on-line test.
3.9 Energy accumulation function can check if there is any energy pulse output meter or to test energy-saving target.
3.10 Measuring three-phase voltage and current waveforms and three-phase voltage and current harmonics 2-21 to keep abreast of quality of power supply.
3.11 In high voltage power supply the un-load wiring also can identify the 2mA current at minimum.
3.12 With 5A 100A 500A 1000A Clamp can measure the low-voltage current transformer turns ratio directly. Can identify the CT secondary circuit breaker poor contact turn-to-turn short circuit whether the CT nameplate ratio is same as actual CT ratio.
3.13 Without adjustable resistance in instrument all correction by the the software.
3.14 With Chinese input the input keyboard is same as computer keyboard layout arrangement applicable for spelling wubi and stroke and other Chinese input methods.
3.15 The electronic instrument is build-in 1G memory can download 5000 user’s data the parameters and downloaded data from all site that may need to enter freely defined by the user.
3.16 Has a USB interface USB connection form a large space easy to copy data.
3.17 Optional for barcode scanner can automatic entry meter coding.
3.18 Optional for 485 or infrared radio head readout multi-function meter peak flat valley all the numbers of active skills. Support for GB DL645 Langille IEC1107 statute.
3.19 Can automatic readout multifunction power meter data.
3.20 Scalable PT secondary voltage drop test functioncan automatic detect the integrated error which cause by voltage transformer secondary voltage dropping.
3.21 Scalable wireless audit function by auditing the host can gather module without wiring combine with 0-3 sets extension can comprehensive detect fault spot metering system inspect integrated high-voltage and low-voltage error.
3.22 Measurement without blind zone can measure all kinds of domestic energy meter.

Voltage measure range					30V~ 480V	5A terminal	Active energy power	±0.05%
Voltage error					±0.05%		Reactive energy power	±0.2%
Current range (Overload 1 times)		Terminal			0.1~5A wide measure range (Guarantee indicator)		current	±0.05%
						5A clamp meter	Active energy power	±0.2%
		Clamp			5A 100A 500A 1000A		Reactive energy power	±0.5%
							Current	±0.2%
Input frequency range					45 ~ 55Hz		Self-checking current	5A 0.5A
Frequency measure error					±0.01Hz		Self-checking error	±0.2%
Phase measure range					-180° ~ +180°	Large current clamp	Active energy power	±0.2% ±0.5%
Maximum phase error					±0.05°±0.1°		Reactive energy power	±0.5%
Harmonic wave measure					±0.05%		Current	±0.2% ±0.5%
Harmonic wave measure range					2~21 times	Others	Ratio measure	±0.5%
Pulse constant	Low frequency		5A		3600P/kWh		Voltage influence	< ±0.01%
			Others		3600*(5/Ie)P/kWh		Frequency influence	< ±0.01%
	High frequency		5A		3.6 *10⁷ P/kWh		Temperature influence	< ±0.005% / ℃
			Others		3.610⁷ (5/Ie)P/kWh		Deviation in 24hours	< ±0.01%
							Harmonic wave influence	< ±0.01%
	Note：Ie--Rated current					Turn-on stabilizing time		<2 minutes
Operation power supply				AC 80V ~ 480V		Environment temperature		-25℃ ~ +45℃
Power dissipation				< 17W		Relative humidity		40% ~ 95%
Outer dimension				330mm×280mm×75mm		Weight		< 3kg

Note:
Power supply: AC110V/115V/120V/127V/220V/230V/240V can be optional
Input frequency: 50Hz/60Hz can be optional
Note: The users can select the corresponding power which based on their local supply voltage and frequency and confirm it before order.

产品严格按照国际、国家标准及行业规程生产，通过国家、各省级、市级电力研究所、计量中心及电力权威部门的检测，以下为校准证书及检定证书样本。

注：电缆交流耐压谐振试验产品参数及外观仅供参考，参数与型号如有变动，恕不另行通知，咨询热线：027-84828685。

Service Principles
We strictly implement the "After-sales Service Commitments", and we firmly believe that high-quality, systematic, comprehensive and fast service is the foundation of business development. We adhere to the principle of "User First", build a good after-sales service system, and provide customers with high-quality pre-sales, in-sales and after-sales services!
Pre-sales Service Commitments
● Supply professional consulting services;
● Provide detailed product information;
● Offer reasonable price.
● Welcome customer to visit
In-Sales Service Commitments
● Signing contract and technical agreement;
● Supply quality products on time;
● Provide suitable package to ensure the products received in good condition.
● Active communication
After Sales Service Commitments
● Professional after-sale service team to supply technical support;
● One-year free warranty, life-long maintenance;
● Help troubleshooting within 24 hours.
● Professional R&D team meets your special requirement.

需要说明书的可以电话联系我们或是发邮件给我们索取说明书。

索要说明书电话：027-8717 9600
邮箱：whnanrui@126.com

SMG8000 Three-phase Power Meter

Product Introduction

Technical Parameters

产品图集

检定证书

After Service

说明书

RECOMMENDATION

CONTACT US