DC Resistance Tester is a transformer DC resistance measurement of the latest generation of products, for the measurement of large capacity transformer winding DC resistance and optimization design. Three-phase winding DC resistance of transformer was tested at the same time. The on-load transformer cannot discharge, directly regulating tap switch, the measurement time is the traditional single-phase measured 1/3, can greatly shorten the labor time and intensity. DC resistance tester with large LCD display, full English interface, clear and intuitive, the operation is very simple. And equipped with panel printer and large capacity non-volatile memory, can store and print the measuring results. Stable test data, fast, good repeatability, is the best choice of DC resistance tester of transformer.
Overview
● Three-channel measurement real-time acquisition simultaneous measurement of three resistance values and calculation of three-phase resistance imbalance;
● It can measure three-phase at the same time or single-channel measurement in the traditional way. It also has a temperature conversion function which is easy to use.
● It has a complete protection circuit and strong reliability;
● The display adopts 800*480 dot matrix 65K color high-brightness large screen (7 inches) the display data is clear and easy to read;
● Built-in calendar clock 150 sets of data storage reading and printing functions;
● Printing information such as the resistance phase sequence and tap position can be set.
● Industrial plastic case light weight and easy to carry.
● With audible discharge alarm and clear discharge instructions to reduce misoperation.
| (1) | NRZDC-S10A Three-phase DC Resistance Tester | 1 piece |
| (2) | Test wire | 1 set |
| (3) | Ground wire | 1 piece |
| (4) | Power wire | 1 piece |
| (5) | Fuse | 3 pieces |
| (6) | Operation manual | 1 copy |
| (7) | Factory test report | 1 copy |
| (8) | Warranty card | 1 copy |
Models
| Testing current | Single-phase | 1A 5A 10A 20A |
| Three-phase | 1A 5A 10A | |
| Testing range | Single-phase |
1A: 10mΩ ~ 20Ω 5A: 1mΩ ~ 4Ω 10A: 1mΩ ~ 2Ω 20A: 1mΩ ~ 1Ω |
| Three-phase |
1A: 10mΩ ~ 6Ω (Each phase) 5A: 1mΩ ~ 1Ω (Each phase) 10A: 1mΩ ~ 0.6Ω (Each phase) |
|
| Testing precision | ± (0.2% full scale ± 2 digital) | |
| Highest Resolution ratio | 0.1μΩ | |
| Data storage | 150 data | |
| Power supply | AC 220V±22V 50Hz±2 Hz | |
| Working environment | Temperature: 0° ~ 40°Relative humidity: ≤ 80% | |
