NRCTP-120P CT PT Analyzer is designed for analyzing current transformers (CT) and voltage transformers (PT) of protection or measurement use. Which is suitable for laboratory and on-site test. It’s a new generation of innovative CT, PT test equipment, which is based on the series of NRFA automatic instrument transformer tester, which already had a good reputation. This device uses high-performance DSP and ARM, with advanced manufacturing process to ensure stable and reliable performance, full-featured, high degree of automation, high efficiency test, it is the professional testing equipment of instrument transformer in the power industry.

Overview

Product Introduction

NRCTP-120P CT PT Analyzer is designed for analyzing current transformers (CT) and voltage transformers (PT) of protection or measurement use. Which is suitable for laboratory and on-site test. It’s a new generation of innovative CT PT test equipment which is based on the series of NRFA automatic instrument transformer tester which already had a good reputation. This device uses high-performance DSP and ARM with advanced manufacturing process to ensure stable and reliable performance full-featured high degree of automation high efficiency test it is the professional testing equipment of instrument transformer in the power industry.

Product Characteristics

• With full-function it not only can test the excitation characteristics (also named VA rating curve) ratio polarity secondary winding resistance secondary burden phase or angle difference for all kinds of CT (such as protective type measuring type and TP) but also can test the VA rating curve ratio polarity secondary winding resistance phase or angle difference for all kinds of PT.
• Automatically given the knee point voltage/ current 10% or 5% error curve accuracy limit factor (ALF) instrument safety factor (FS) secondary time constant (Ts) remanence factor (Kr) saturated and unsaturated inductance and other parameters of CT and PT.
• The test meets GB1208 (IEC60044-1) GB16847 (IEC60044-6) GB1207 and other types of transformer’s standards it can automatically select the suitable standards to test according to the type and level of transformer.
• based on an advanced low-frequency testing theory the knee point voltage of CT can be up to 30KV.
• Beautiful and friendly interface.
• The device can store 2000 groups of test data automatically even a sudden of brownout. For data analysis U disk can transfer to PC after testing and produce WORD reports.
• The test is simple and convenient one key to complete the DC resistance excitation ratio and polarity test of CT in addition to the load tests CT various other tests are based on the same kind of wiring method.
• Easy to carry device weight less than 9.0 kg.

Main Functions

CT PT
VA rating (excitation) curve VA rating (excitation) curve
Ratio Ratio
Polarity Polarity
Secondary winding resistance Secondary winding resistance
Secondary load Secondary load
Phase (angle difference) Phase (angle difference)
Knee point voltage/ current Knee point voltage/ current
Given 5% and 10% error curve automatically Given 5% and 10% error curve automatically
Accuracy limit factor (ALF) Accuracy limit factor (ALF)
The safety factor of instrument (FS) The safety factor of instrument (FS)
Secondary time constant (Ts) Secondary time constant (Ts)
Remanence factor (Kr) Remanence factor (Kr)
Saturated and unsaturated inductance Saturated and unsaturated inductance

Models

Testing purposes Protective CT and PT
Output 0~100Vrms 12Arms 36A (peak value)
Voltage measuring accuracy ±0.2%
CT ratio
measurement
Range 1~10000
Accuracy ±0.2%
PT ratio
measurement
Range 1~10000
Accuracy ±0.2%
Phase measurement Accuracy ±5min
Resolution 0.5min
Secondary winding resistance measurement Range 0~300Ω
Accuracy 2%±2mΩ
AC load measurement Range 0~300VA
Accuracy 2%±0.2VA
Input power voltage AC220V±10%,50Hz
Operating Environment  Temperature: -10℃ ~ 50℃; Humidity: ≤ 90%
Dimension and weight Size: 340mm × 300mm × 150mm; weight <9kg

Company Profile

Wuhan NANR Electric Co., Ltd.

LEARN MORE

NEWS

Company News,Industry News,Power Technology

LEARN MORE

ENGINEERING CASE

Workers' field test

LEARN MORE