ETCR Series Clamp-on Earthing Resistance Tester

ETCR Series Clamp-on Earthing Resistance Tester is widely used to measure ground resistance and loop resistance in electric power, telecommunications, meteorology, oil, construction and industrial electrical equipment. When measuring the circuit grounding system, without disconnecting ground deflectors, without auxiliary electrode, it’s safe and fast. It can measure the ground fault which difficult to be measured by traditional methods, because the ETCR Series Clamp-on Earthing Resistance Tester can measures the ground resistance and ground lead resistance.

Product Video

Datasheet

Regulations

Overview

Product Introduction

ETCR Series Clamp-on Earthing Resistance Tester is widely used to measure ground resistance and loop resistance in electric power telecommunications meteorology oil construction and industrial electrical equipment. When measuring the circuit grounding system without disconnecting ground deflectors without auxiliary electrode it’s safe and fast. It can measure the ground fault which difficult to be measured by traditional methods because the ETCR Series Clamp-on Earthing Resistance Tester can measures the ground resistance and ground lead resistance.

Product Characteristics

● After boot can immediately enter into the test
● Using the most advanced processing algorithms and digital integration technology
● Light weight and smart is portable
● New design 6 keys in the plant straight performance.
● Add the sound and light alarm function: “Beep--Beep--Beep--”.
● Add the jamming signal recognition function “Beep--Beep--Beep--”.
● The measure range extend to 0.01Ω-1200Ω.

Models

1. Series Model

Model	Jaw Specification (㎜)		Resistance range Ω)		Current range (A)	Anti-explosion function	Store 99 groups	Sound & light alarm	Note
Model	Round:Φ32	Length:32×65	0.01-200	0.01-1200	0-20A	Anti-explosion function	Store 99 groups	Sound & light alarm	Note
ETCR2000+		√		√			√	√	Basic Type
ETCR2000A+		√	√				√	√	Utility type
ETCR2000B+		√		√		√	√	√	Anti-explosion type
ETCR2000C+		√		√	√		√	√	Multifunctional type
ETCR2100+	√			√			√	√	Basic type
ETCR2100A+	√		√				√	√	Utility type
ETCR2100B+	√			√		√	√	√	Anti-explosion type
ETCR2100C+	√			√	√		√	√	Multifunctional type

Note: “√” means with the specification

2. Range and accuracy

Test mode	Test range	Resolution	Accuracy
Resistance	0.010Ω-0.099Ω	0.001Ω	±（1%＋0.01Ω）
	0.10Ω-0.99Ω	0.01Ω	±（1%＋0.01Ω）
	1.0Ω-49.9Ω	0.1Ω	±（1%＋0.1Ω）
	50.0Ω-99.5Ω	0.5Ω	±（1.5%＋0.5Ω）
	100Ω-199Ω	1Ω	±（2%＋1Ω）
	200Ω-395Ω	5Ω	±（5%＋5Ω）
	400-590Ω	10Ω	±（10%＋10Ω）
	600Ω-880Ω	20Ω	±（20%＋20Ω）
	900Ω-1200Ω	30Ω	±（25%＋30Ω）
*Current	0.00mA -9.95mA	0.05mA	±（2.5%＋1mA）
	10.0mA -99.0mA	0.1mA	±（2.5%＋5mA）
	100mA -300mA	1mA	±（2.5%＋10mA）
	0.30A-2.99A	0.01A	±（2.5%＋0.1A）
	3.0A-9.9A	0.1A	±（2.5%＋0.3A）
	10.0A-20.0A	0.1 A	±（2.5%＋0.5A）

3. Technical specifications

Resistance range	0.01Ω-1200Ω
*Current range	0.00mA-20.0A
Resistance resolution	0.001Ω
*Current resolution	0.05mA
Data Store	99 groups
Sound and light alarm	“Beeping--beeping--beeping--” press the AL to open or shut
Alarm critical value setting range	Resistance:1-199Ω; *Current: 1-499mA
Power supply	6VDC (4 pieces No5 alkaline batteries)
Operation environment	-20℃-55℃；10％RH-90％RH
LCD display	4 bite LCD digital display 47mm(length)×28.5mm(width)
Jaw dimension	Long jaw 65mm×32mm: Round jaw Φ32mm
Jaw open dimension	Long jaw 35mm; Round jaw 32mm
Weight	Long jaw 1160g; Round jaw 1120g (includes battery)
Champ dimension	Long jaw: 285mm×85mm×56mm (Lengthwidththickness) Round jaw: 260mm×90mm×66mm (Lengthwidththickness)
Anti-explosion	Exia Ⅱ BT3
Protection level	Double insulation
Structure feature	Clamp CT
Shift	Automatic shift
Outer magnetic and electric field	＜40A/m; ＜1V/m
Single measure time	0.5 second
Resistance measure frequency	＞1KHz
*The tested current frequency	50/60Hz by automatic

Note: “*” only for C type.