The insulating oil dielectric strength tester calibrator is a professional instrument designed for the measurement and calibration of insulating oil dielectric strength tester in electric power test and measurement Institute. The instrument can calibrate the performance parameters such as breakdown voltage, boost rate and waveform distortion of insulating oil dielectric strength tester, and automatically give the test result report. The device takes the voltage at the moment of breakdown of the insulating oil dielectric strength tester as the detection basis and calculates the error of the instrument. Compared with the previous steady-state calibration method, it is more intuitive, accurate and effective.
Overview
(2) Real-time display of the output voltage waveform of the tested product and record the voltage waveform diagram of the test product at the moment of breakdown which can easily analyze the cut-off time of the tested product;
(3) Sample 2 channels of high voltage signals and detect the high voltage signals of the two high voltage arms of the insulating oil dielectric strength tester at the same time;
(4) The instrument can automatically generate word format test report;
(5) Automatically save the test environment settings and instrument settings of various tests;
(6) Automatically calculate the test parameters of various tests;
(7) Draw test curves in real time and provide a variety of curve analysis tools so that users can perform arbitrary zoom and positioning operations on the curve.
Models
1. Measurement error for 10kV ~ 100kV | < 0.2%RDG+0.04kV |
2. Measurement error for boosting rate | < 0.5% |
3. Resolution for time reading | 39us |
4. Power supply | AC220V±10% 50Hz |
5. The highest measurement voltage | 100kv (-50kV~50kV do not connect to breakdown control box) |
6. The highest breakdown voltage | 80kV |
7. The capacitance of the voltage divider is 10pF and the highest measurement voltage is 50kV (50Hz/60Hz) | |
8. The maximum allowable input voltage of the breakdown control box: 80kV | |
9. Computers supporting application software systems must meet the following requirements: (1) CPU frequency>1.5GHz (2) System memory>1GB (3) The computer's operating system is Windows XP/ Windows 7 (4) Computer's hard disk>40G (5) With USB2.0 interface |