The NRBLC-IV three-phase zinc-oxide arrester tester is a special instrument used to test the electrical performance of zinc-oxide arresters. The instrument is applicable to the live or power failure detection of zinc oxide arrester with 35kV ~ 500kV voltage level, so as to timely find dangerous defects such as damp insulation inside the equipment and aging of valve plate.
Overview
● Adopting high-precision sampling processing circuit advanced Fourier harmonic analysis techniques to ensure the data is more reliable.
● Using a unique high-speed magnetic isolation digital sensor to directly collect the signal of input voltage and current ensure the data reliability and security.
● This instrument can use electric field induction method instead of PT secondary wiring.
● Support wireless synchronization voltage sampling way.
● The instrument can measure three phases at the same time and compensate automatically. It is particularly convenient to use
● With the function of fundamental peak output of resistive current edge phase correction and so on.
● The instrument is equipped with a rechargeable battery calendar clock mini printer it can store 120 sets of measurement data;
Models
(2) Measurement accuracy of fundamental resistive current (secondary law without interphase interference): ± (reading × 5% +5 μA)
(3) Accuracy of current harmonics: ± (reading × 10% +10 μA)
(4) Input range of reference voltage: 25V ~ 250V RMS total harmonic content < 30% 50Hz/ 60Hz
(5) Measurement accuracy of reference voltage: ± (reading × 5% +0.5 V)
(6) Measurement accuracy of voltage harmonics: ± (reading × 10%)
(7) The angle of fundamental current and voltage Φ: 0 ~ 360°
(8) Battery working time: Host 6 hours
Charging power: 220V ± 10% 50Hz/ 60Hz Charging time: 5 hours
(9) Dimensions: 325mm × 280mm × 140mm
(10) Weight: 3.5Kg (do not include cable)
(11) Operating environment: Temperature: -10-50 ℃ Relative humidity: < 90%