SF6 Gas density relay tester is the latest high-precision instruments, it is adopt with high accuracy pressure sensor and A/D,D/A transducer, combined with 32 ARM single-clip and high speed signal dealing clip of TI, can finish the test for SF6 Intensity Delay automatically, can correctly test the pressure under signalizing activity, and finish the standard pressure conversion under 0~20℃, can save and print the test results, the whole procedure need not people control, can automatically identify the fault during the test. It’s with the features: high accuracy, high stability, strong reliability.
Overview
● Use 32 ARM single-clip and high-speed signal dealing clip of TI to test and control with high integrated degree electromechanical integration design with high accuracy good reproducibility and strong reliability.
● Equipped with monochrome LCD and soft keyboard man machine interface easy to operate with beautiful appearance.
● Automatically finish the conversion between pressure measurement and 20℃ thereby finish the dynamic automatic compensation between pressure and temperature. And display the pressure of the measured environment the equivalent pressure under 20℃ temperature.
● The device automatically finishes the test do not need people's intervention
● Print the test results in report and intelligent analysis the results.
● Can save the test results for 50 tests can review and print the historical test results at any time.
● Do not need thermostatic chamber during the test can calibrate the SF6 density pressure meter at any available temperature.
● Equipped with many kinds of transition joint for most of the density relay tester can do field test without disassemble.
● Will not waste SF6 during the test with low test cost without pollution to environment.
● Can online modify the system time.
● Can online modify the system pressure on site.
● Its key parts all imported from foreign countries with reliable property.
● Can test on group alarm signal two groups atresia signal.
● This product is portable device easy and reliable to use it is the ideal equipment for SF6 density tests.
Models
Working voltage: | AC220V 50Hz |
Power: | 50W |
Accuracy: | 0.2 level |
Pressure display resolution: | 0.001MPa |
Pressure calibration range: | 0 ~ 1.0MPa |
Temperature display resolution: | 0.1℃ |
Temperature measurement range: | -50℃~150℃ |
Operating humidity: | ≤ 90%RH |
Test objects: | single alarm single latch single alarm & single latch dual alarm & dual latch |
Display: | 320×240 graphics dot matrix monochrome LCD screen |
Mode of operation: | rotate mouse (a key shuttle) input |
Printer: | high-speed micro printer |
Print method: | report type |
Storage capacity: | can save 50 times of test results at the same time |
Dimensions: |
host 365mmx300mmx220mm accessory case: 400mmx370mmx200mm |
SF6 gas density display: | the pressure under the test environment the equivalent pressure under 20℃. |
Weight: |
host: 8kg accessory case: 9.8kg |