High Voltage Cable Detector is mainly used for detecting high-voltage cable charge or not, in order to overcome the construction site frequently occur due to pilot error, or saw the wrong cable tie caused major power outages or personal safety incidents to ensure construction safety, greatly improve the construction, maintenance efficiency, protection of industrial and agricultural production and people's normal live.
Overview
● It can identify whether the hot standby high voltage cable and power failure high voltage cable is charged or not.
● Complete sets of equipment are more portable beautiful.
● Instructions clear intuitive with a blue back-light.
● Designed for hand-held single-handed operation in line with user-friendly design philosophy.
● Sensitivity adjustable with two highly sensitive detection probe for a variety of sites.
● A probe is suitable for running cable identification B probe is suitable to cooperate with A probe to complete the live (running hot standby) and power cable identification.
Models
Measuring range | 2.0m ~ 100km | |
Measuring highest resolution | 0.6m | |
Measuring minimum blind spot | 2m | |
Ultra-high-speed A/D sampling frequency | 100MHz automatic selection | |
Measurement of low-voltage pulse amplitude | ≥ 150V | |
Error | System error | 0.2m |
Initial measurement error for the host |
1% (relative) 10m (when the absolute error < 1km) 15m (when the absolute error > 1km) |
|
Digital integrated no-noise fault fixed-point instrument |
1) Multiple hardware and software filtering process excellent noise immunity; 2) Fixed-point error: ≤ 0.2m; 3) Electromagnetic channel gain: ≥ 110dB (300000 times); 4) Sound channel gain: ≥ 120dB (1000000 times); 5) Advanced sound-magnetic in one high-sensitive noise-free anti-interference probe (overall integrated structure); 6) Advanced headphones electronic instructions. |
|
High power path signal generator |
1) Output power: 8W 2) Output frequency: 5.000kHz /62.500kHz 3) Receiving frequency: 50Hz / 5kHz / 62.5kHz 4) With overheating over-current short circuit and other reliable protection measures 5) Full-power automatic impedance matching 6) SCM control electronic display |
|
Power supply |
1) The host is built in high-capacity lithium-ion rechargeable battery; 2) Fixed-point instrument is built-in 9V high-capacity battery; 3) Hand-held multi-frequency path meter is built-in 9V high-capacity battery 4) Path signal generator AC220V±10% |
|
Dimensions | 380*320* 240 full sets in one box |